Henderson Motorcycle Paint Aerosols/Litre Tins & Touch Up Pots & Pens

For best results, we recommend aerosol primer be used on surfaces before the top coat paint is applied.

Product Description

Low-cost colour matched Henderson Motorcycle Paint aerosol spray paint custom mixed & packaged into high-quality 400ml aerosol canisters. These are the perfect option for touch-ups, repairs or re-spraying your motorbike an alternative colour. 1k & 2k (also known as 2-Pack aerosols) options are available. Bulk discount prices are available. Henderson Motorcycle Paint touch-up & repair pots.

Caution Before Applying Henderson Motorcycle Paint

These are mixed colour paints; the accuracy of the colour should be checked BEFORE application. No responsibility for colour differences will be accepted once the paint has been applied.

Some motorbike paint codes require a first and second coat; both would need to be purchased for a correct colour match. If this is the case, WE will contact you via the email address used to place the order.

Please be aware; all Henderson Motorcycle Paint paints are supplied as unprotected 'Base coats' with a matt finish.

This means you will need to apply an aerosol lacquer over the top to paint protection from damages and achieve your desired gloss level and colour pigment.

For optimal results, we also recommend aerosol primer be used on all surfaces before paint is applied.

Safety Data Sheets

Henderson Motorcycle Paint 1K/1 Pack Data Sheet

Henderson Motorcycle Paint 2K/2 Pack Data Sheet

Drying Times

20 - 30 minutes touch dry

Directions For Use

1. Ensure the surface area of your motorbike is clean and dry.
2. Mask adjacent area with tape.
3. Shake can for two minutes before use.
4. Test product first on another small site to check colour.
5. Hold the spray head at a distance of 20 to 30 cm away from the surface to be painted.
6. Spray with an even stroke from right to left and release the spray head at each stroke's end.
7. After use, invert the can and clear the spray head by spraying until clear gas only is emitted.
8. If paint spray head should clog, remove and clean with cellulose thinners.
9. Never point spray head towards a person.

Share Your Experiance